iSpring MRO800 RO Membrane Reverse Osmosis Replacement, High Flow up to 800 GPD, 2.5:1 Pure to Waste water ratio

$149.99

About this item

【Easy Replacement】Effortless twist-and-lock filters without cutting off the water supply. It takes only seconds to finish with no tools needed, which is truly time saving and energy saving.
【Fast flow 】Provides RO quality water of up to 800 gallons per day, with up to 2.5:1 pure water to waste water ratio. It's 5x more efficient than a traditional RO membrane.
【High Effectiveness】 Rejects a wide spectrum of impurities down to 0.0001 micron. Also removes heavy metals and many organic matters.
【Lifetime】Up to 24-36 months filter life depending on daily usage and the quality of the water.
【Compatibility】Compatible with RO800G Tankless RO Reverse Osmosis Water Filtration System.

Frequently Bought Together

iSpring FPPC Replacement Water Filter for RO800 Reverse Osmosis System

Total Price: $1313.96

Add all four to Cart

Choose items to buy together.

Please choose options for all selected products

This Item: MRO800 RO Membrane Reverse Osmosis Replacement, High Flow up to 800 GPD, 2.5:1 Pure to Waste water ratio $149.99

RO800G Tankless RO Reverse Osmosis Water Filtration System, 800 GPD Fast Flow, Up to 2.5:1 Pure to Drain Ratio, Gray $499.99

FPPC Replacement Water Filter for RO800 Reverse Osmosis System $34.99

RO800G+UVF8 Tankless Reverse Osmosis System with LED UVF8 Light, 800 GPD Fast Flow RO System, 2.5:1 Pure to Drain Ratio RO Water Filter System, Brushed Nickel Faucet $628.99

iSpring MRO800 RO Membrane Reverse Osmosis Replacement, High Flow up to 800 GPD, 2.5:1 Pure to Waste water ratio

$149.99

iSpring MRO800 Replacement RO membrane for RO800

Display and Operating Area

Press “Select” for 5 seconds. The machine will start the flush process that lasts for 30 seconds. During the process, the red light will flash.

The “ON” light flashes when the system is running and filtered water is being dispensed. This light remains on when the system is in standby mode.

Filter life indicating lights remain white and start to blink in white when the corresponded filter life has less than 10% remaining, then turn red when the filter needs to be replaced ASAP.

Unbeatable Performance

RO800G membrane is rated at 800 gallons per day with up to 2.5:1 pure water to wastewater ratio and a flow rate of up to 0.6 gallon per minute, which is more than 750% more efficient than a traditional reverse osmosis system. It also helps to reduce the TDS. Plug and play with automatic pre-flush and filter life reminders on the system.

Tankless design, quick installation process, click and lock filters

iSpring RO800G’s tankless design saves up to 750% of water than traditional RO Systems. With a detailed instruction manual, it is easy to install and maintain. And the filter can be changed in seconds, which makes it one of the most advanced RO water filtration systems.

PP+CTO Composite Filter + Advanced RO Membrane

2-Stage Filtration Performance

Stage 1 (FPPC):

The composite filter utilizes a multi-layer design and removes dirt, sand, silt, rust, and scale particles, absorbs THMs, VOCs, and pesticides

Removes unpleasant chlorine, taste, odors, cloudiness, and colors.

Replaced every 6 - 12 month

Stage 2（MRO800）:

800GPD high flow reverse osmosis membrane

Rejects a wide spectrum of impurities down to 0.0001 micron.

Removes heavy metals and many organic matters.

Replaced every 24-36 month

The actual filter replacement cycle varies depending on the source water quality actual usage of the system. The time between each filter replacement should not exceed the maximum suggested data.