Fittings
View
- Compatible with most Reverse Osmosis systems (including brand names) in the market
- Quick fitting
- 1/4” thread by 1/4” tube
- Works as tank valve or water shut-off valve
View
- Auto Flush Solenoid Valve for Residential RO Systems with pump
- Compatible with most Reverse Osmosis systems with Booster Pump (including brand names) in the market
- 24V DC
- 1/4" Jaco fitting
View
- Compatible with most Reverse Osmosis systems with Booster Pump (including brand names) in the market
- 24V DC
- 1/4" Jaco fitting
View
- Compatible with most Reverse Osmosis systems (including brand names) in the market
- To be installed on the DRAIN line
- 1/4" quick connect fitting
View
- For adding an extra stage of filter to existing RO systems
- Includes: Clamps X2, Tubing x1, Male Elbow 1/4" in NPT to 1/4" push-in quick connect fitting X2, Stem Elbow 1/4" push-in quick connect fitting X2.
- Suitable for most RO systems in
View
- iSpring Automatic Shut-off Valve (ASV) - Quick Fitting
- Compatible with most Reverse Osmosis systems (including brand names) in the market
- Allows your system to turn off the water supply when the tank pressure reaches approximately 65% of
View
- Water Pressure Gauge, 6 bar, 90 PSI
- Connect a piece of hose to the gauge
- Attach the other end to your tap
- Turn the water on fully
- Read the pressure as simple as that!
View
- Used in Reverse Osmosis system with Booster Pump
- Shuts off Booster Pump when the filters are blocked or water pressure to pump is lower than 7 psi
- 1/4 inch Jaco fitting
View
- Compatible with most Reverse Osmosis systems with Booster Pump in the market.
- To be installed to shut off Booster Pump when the tank is full.
- 1/4 inch Jaco fitting.
View
- Connections: 1/4" Push-in Quick Connect x 1/4" NPT female thread
- Solid construction
- EPDM O-ring
- FDA approved material
- Tested by independent third-party to meet NSF/ANSI Standard 51 & 61
- Suitable for wate
View
- Compatible with most reverse osmosis systems of 75 - 100 GPD (including brand names) in the market
- To be installed on the drain line
- Recommended for RO systems of 75GPD or 100GPD, or for customers whose source water TDS is more than 200 p
View
- 3/8" Male and Female NPT, compatible with most undersink multi-turn valve and kitchen faucet connector.
- Branch out water supply for water filter system that uses 1/4-inch tubing.
- All metal body
- Ceramic valve disk
- Washer included
View
- Ceramic valve disk for up to 1 million leak-free smooth turns
- Washer included
- No tools required for installation
View
- Connect membrane to Reverse Osmosis System
- Comes with 2 clips
- Work with iSpring water RO system
iSpring ABV2K Reverse Osmosis Water Storage Tank (1/4" Quick Fitting Tank Valve) (ABV2K)
Compatible with most Reverse Osmosis systems (including brand names) in the market Quick fitting 1/4” thread by 1/4” tube Works as tank valve or water shut-off valve
iSpring ASOF7 Auto Flush Solenoid Valve for RCC7P Series Residential RO (ASOF7)
Auto Flush Solenoid Valve for Residential RO Systems with pump
Compatible with most Reverse Osmosis systems with Booster Pump (including brand names) in the market
24V DC
1/4" Jaco fitting
iSpring ASOW7 Feed Water Solenoid Valve for RCC7P Residential RO System (ASOW7)
Compatible with most Reverse Osmosis systems with Booster Pump (including brand names) in the market 24V DC 1/4" Jaco fitting
iSpring AFR300 Flow Restrictor / Flow Limit 300 ml/min (AFR300)
Compatible with most Reverse Osmosis systems (including brand names) in the market
To be installed on the DRAIN line
1/4" quick connect fitting
iSpring ACL1 Reverse Osmosis Add-on Filter Kit (ACL1)
For adding an extra stage of filter to existing RO systems
Includes: Clamps X2, Tubing x1, Male Elbow 1/4" in NPT to 1/4" push-in quick connect fitting X2, Stem Elbow 1/4" push-in quick connect fitting X2.
Suitable for most RO systems in the market
Push-in quick connect fittings offer DIY installation with no tools required
iSpring AAS2 Reverse Osmosis Water Filter Automatic Shut Off Valve Quick Connect (AAS2)
iSpring Automatic Shut-off Valve (ASV) - Quick Fitting
Compatible with most Reverse Osmosis systems (including brand names) in the market
Allows your system to turn off the water supply when the tank pressure reaches approximately 65% of the supply water pressure
1/4" fittings
iSpring APG6 Pressure Gauge (APG6)
Water Pressure Gauge, 6 bar, 90 PSI Connect a piece of hose to the gauge Attach the other end to your tap Turn the water on fully Read the pressure as simple as that!
iSpring ALP1 Low pressure switch for Reverse Osmosis Water Filter with Booster Pump (ALP1)
Used in Reverse Osmosis system with Booster Pump Shuts off Booster Pump when the filters are blocked or water pressure to pump is lower than 7 psi 1/4 inch Jaco fitting
iSpring AHP1 High pressure switch for Reverse Osmosis Water Filter with Booster Pump (AHP1)
Compatible with most Reverse Osmosis systems with Booster Pump in the market.
To be installed to shut off Booster Pump when the tank is full.
1/4 inch Jaco fitting.
iSpring AFA2K Tube To Thread Adapter, 1/4 IN Quick-fitting by 1/4 IN NPT Female Thread (AFA2K)
Connections: 1/4" Push-in Quick Connect x 1/4" NPT female thread Solid construction EPDM O-ring FDA approved material Tested by independent third-party to meet NSF/ANSI Standard 51 & 61 Suitable for water & food applications NOT suitable for compressed air or vacuum applications
iSpring AFR420K Flow Restrictor, White (AFR420K)
Compatible with most reverse osmosis systems of 75 - 100 GPD (including brand names) in the market
To be installed on the drain line
Recommended for RO systems of 75GPD or 100GPD, or for customers whose source water TDS is more than 200 ppm
Features 1/4” quick fitting
iSpring AFW Water Supply Adapter (Angle stop valve) 3/8 x 3/8 x 1/4 inch (AFW)
3/8" Male and Female NPT, compatible with most undersink multi-turn valve and kitchen faucet connector. Branch out water supply for water filter system that uses 1/4-inch tubing. All metal body Ceramic valve disk Washer included No tools required
iSpring AFW43 Feed water adapter, Sliver (AFW43)
Ceramic valve disk for up to 1 million leak-free smooth turns
Washer included
No tools required for installation
iSpring ACN23X2 Add-on Filter to Membrane Clamps #ACN23 Set of 2, White 2 Piece (ACN23X2)
Connect membrane to Reverse Osmosis System
Comes with 2 clips
Work with iSpring water RO system
iSpring ACN22X2 Add-on Filter Clamps - Set of 2, White 2 Piece (ACN22X2)
Holds filter to filter.
Comes with 2 clips.
Work with iSpring water system
LittleWell 702KX2 1/4" x 1/4" x1/4" Quick Connect Push Fitting TEE splitter, 0404UTX2 702KX2, Pack of 2 (0404UTX2 (702KX2))
1/4" x 1/4" x 1/4" OD. 2 T-splitters included.