Search
Search Criteria
Products meeting the search criteria
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 20 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI Standard. This filter can also be used for pool and hottub.<
View
- Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water
View
- Reduces up to 99% of chlorine, sediment, hydrogen sulfide, and water-soluble heavy metals.
- Filters last for 3–6 months and can also be used for wastewater processing.
- Built-in filter life indicator.
- BPA-free. <
View
- Multi-layer gradient design
- 2.5 inch (O.D) x 10 inch (Length) x 1 1/8 inch (I.D), Fits industry standard 10 inch filter housings
- Good for RO, Counter-top, Whole-house water filters and ice machine, film, beverage processing
- Genuine filte
View
- Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filt
View
- Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 10 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.<
View
- Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 50 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.<
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 20 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.<
View
- A combination of a sparse layer, compaction layer, and precision layer ensures this iSpring 5-micron polypropylene sediment filter captures dirt, sand, silt, dust, rust, and scale particles effective
View
- Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of
View
- Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filt
View
- Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water
View
- Made of Melt-Blown Polypropylene, 4-layer filtration. This filter can also be used for pool and hottub.
- 1/4" Quick-Change Fitting
- Individually wrapped
- Capable to work at low water pressure
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration. This filter can also be used for pool and hottub.
- Diameter 2.5" x 10" Length
- 5 Micron - 25 filters included
- Fits 10" filter housings
- Tested by independent third-party to me
View
- The FPDS sediment filters are specially designed to reduce sediments, dust, sand, large particles, silt, dirt, and rust from water. They are used as the first stage of the bottleless water filter dispenser to prevent the filters from getting clogge
View
- 3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination
View
- Effective Particle Removal: The FP500 water filter replacement captures fine particles down to 5 microns, including sand, silt, rust, and sediments.
- Protects Your System: This replacement filter shields other filters, extending their life
View
- 3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination
iSpring FP120X25 20 Micron Box of 25 Standard 10"x2.5" Sediment Water Filter Replacement (FP120X25)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 20 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI Standard. This filter can also be used for pool and hottub.
iSpring FP110X25 10 Micron, 25 Pack 10" x 2.5" Universal Multi-layer Sediment Water Filter Replacement Cartridges, White, 25 Piece (FP110X25)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name models
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
Aquafeel AFPF001 Water Filter Pitcher with Replaceable Cartridge-Removes Chlorine, Sediment, Heavy Metal, and Odor, 48 oz, Clear (AFPF001)
Reduces up to 99% of chlorine, sediment, hydrogen sulfide, and water-soluble heavy metals.
Filters last for 3–6 months and can also be used for wastewater processing.
Built-in filter life indicator.
BPA-free.
Please note: this filter does not lower the TDS count.
iSpring FP11X25 1 Micron Box of 25 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 25-Pack (FP11X25)
Multi-layer gradient design 2.5 inch (O.D) x 10 inch (Length) x 1 1/8 inch (I.D), Fits industry standard 10 inch filter housings Good for RO, Counter-top, Whole-house water filters and ice machine, film, beverage processing Genuine filter cartridge supply. This filter can also be used for pool and hottub.
iSpring FP25 20” x 2.5” Water Filter Replacement Cartridges - Fine Sediment Filter - 5 Micron - Fits Standard 20” x 2.5” Water Filtration Systems (FP25)
Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 20” x 2.5” housings, including brand name models.
The FP25 polypropylene sediment filter is able to achieve filtration down to 5 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year (depending on your water quality). Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP11X50-N, NSF Certified, 1 Micron 10"x2.5" Multi-layer Sediment Water Filter Replacement Cartridges, 50-Pack (FP11X50-N)
Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of downstream filters. This filter can also be used for pool and hottub.
Standard 10” x 2.5” Fit – Compatible with most 10” x 2.5” filter housings from various brands, these filters offer a universal fit for residential and light commercial systems.
Consistent Performance – Constructed from high-quality polypropylene, these filters provide fine filtration down to 1 microns. Each cartridge supports clean water flow for up to 6 months for a typical family, with minimal impact on pressure.
U.S.-Based Customer Support – Register your product online to enjoy extended warranty and complimentary tech support from our dedicated U.S. team. We’re here to help with any concerns to ensure your satisfaction.
Individually Wrapped for Freshness – Each cartridge is sealed to preserve quality until use. Note: These filters do not reduce TDS but instead retain healthy minerals in your water. If you need TDS reduction, check out our iSpring Reverse Osmosis systems.
iSpring FP110X50 10 Micron Box of 50 Standard 10"x2.5" Sediment Water Filter Replacement, 50-Pack (FP110X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 10 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring FP15X50-N, NSF Certified, 5 Micron 10"x2.5" Multi-layer Sediment Water Filter Cartridges, 50-Pack (FP15X50-N)
Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of downstream filters. This filter can also be used for pool and hottub.
Standard 10” x 2.5” Fit – Compatible with most 10” x 2.5” filter housings from various brands, these filters offer a universal fit for residential and light commercial systems.
Consistent Performance – Constructed from high-quality polypropylene, these filters provide fine filtration down to 5 microns. Each cartridge supports clean water flow for up to 6 months for a typical family, with minimal impact on pressure.
U.S.-Based Customer Support – Register your product online to enjoy extended warranty and complimentary tech support from our dedicated U.S. team. We’re here to help with any concerns to ensure your satisfaction.
Individually Wrapped for Freshness – Each cartridge is sealed to preserve quality until use. Note: These filters do not reduce TDS but instead retain healthy minerals in your water. If you need TDS reduction, check out our iSpring Reverse Osmosis systems.
iSpring FP150X50 50 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack (FP150X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 50 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring FP120X50 20 Micron Box of 50 Standard 10"x2.5" Sediment Water Filter Replacement, 50-Pack (FP120X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 20 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring FP15B Sediment Filter Replacement Cartridge for Whole House Water Filtration Systems, High Capacity 5-Micron Premium PP, 4.5" x 10" (FP15B)
A combination of a sparse layer, compaction
layer, and precision layer ensures this iSpring 5-micron
polypropylene sediment filter captures dirt, sand, silt, dust, rust,
and scale particles effectively. This filter can also be used for pool and hottub.
Filters up to 15,000 gallons depending on the
use and feed water quality. Replace the filter every 3-6 months to
achieve ideal performance.
Combining with other filters such as CTO
filter(FC15B), iSpring fine PP sediment filter not only brings clean
and refreshing water to every faucet in your home but also helps to
prolong the lives of your appliances and protects plumbing from
sediment and scale buildup.
Official 1-stage sediment filter for iSpring
whole house water filtration system WGB21B. Fits standard 10" x 4.5"
whole house water filtration systems. Individually sealed for
freshness.
Your worry-free shopping experience is
backed by a 30-day money-back guarantee and lifetime tech support from
iSpring in Atlanta, GA at (678) 261-7611.
iSpring FP15X4-N, NSF Certified, 5 Micron 10"x2.5" Multi-layer Sediment Water Filter Cartridges, 4-Pack (FP15X4-N)
Powerful First-Line Protection – Engineered to capture sediment, dust, sand, silt, rust, and large particles, these FP series filters serve as an effective first stage of a water filtration system. They help reduce buildup and extend the life of downstream filters. This filter can also be used for pool and hottub.
Standard 10” x 2.5” Fit – Compatible with most 10” x 2.5” filter housings from various brands, these filters offer a universal fit for residential and light commercial systems.
Consistent Performance – Constructed from high-quality polypropylene, these filters provide fine filtration down to 5 microns. Each cartridge supports clean water flow for up to 6 months for a typical family, with minimal impact on pressure.
U.S.-Based Customer Support – Register your product online to enjoy extended warranty and complimentary tech support from our dedicated U.S. team. We’re here to help with any concerns to ensure your satisfaction.
Individually Wrapped for Freshness – Each cartridge is sealed to preserve quality until use. Note: These filters do not reduce TDS but instead retain healthy minerals in your water. If you need TDS reduction, check out our iSpring Reverse Osmosis systems.
iSpring FP25X25 High Capacity 20” x 2.5” Water Filter Replacement Cartridges - Fine Sediment Filter - 5 Micron - Pack of 25 (FP25X25)
Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 20” x 2.5” housings, including brand name models.
The FP25 polypropylene sediment filter is able to achieve filtration down to 5 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year (depending on your water quality). Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP110 NSF/ANSI 58 Certified 10 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP110)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name models
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FP15Q Quick-Change 5 micron Sediment Filter, Fits CU-A4 Ultra Filtration System (FP15Q)
Made of Melt-Blown Polypropylene, 4-layer filtration. This filter can also be used for pool and hottub.
1/4" Quick-Change Fitting
Individually wrapped
Capable to work at low water pressure
iSpring FP15X25 5 Micron Box of 25 10"x2.5" Standard Sediment Water Filter Replacement Cartridge, 25-Pack (FP15X25)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration. This filter can also be used for pool and hottub. Diameter 2.5" x 10" Length 5 Micron - 25 filters included Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard
iSpring FPDS 1st Stage Sediment Filter Replacement for DS4B & DS4S (FPDS)
The FPDS sediment filters are specially designed to reduce sediments, dust, sand, large particles, silt, dirt, and rust from water. They are used as the first stage of the bottleless water filter dispenser to prevent the filters from getting clogged too soon. This filter can also be used for pool and hottub.
The FPDS high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns.
Filter changing schedule will be based on the contamination level of your source water and your water use. We recommend changing this FPDS filter every 3-6 months for ideal filtration performance. Our filter cartridges are simple and easy to replace.
Each cartridge is individually wrapped to ensure that the filter stays fresh. Please unwrap the cartridges before installation. And flush it for 3-5 mins before using.
We offer tech and CS support. Contact our responsive and professional team for product selection to suit your water filtration needs and after-sale support to maximize your user experience. Now, and years to come, we will be right here and ready to help.
LittleWell AEPF12FPT12X4 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Female Pipe Thread, 4 Pack, works the same as SharkBite (AEPF12FPT12X4)
3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
iSpring FP500 1st-Stage 5-Micron Sediment Replacement Filter for RO5004F Series Tankless Reverse Osmosis System, Lasts up to 6 Months (FP500)
Effective Particle Removal: The FP500 water filter replacement captures fine particles down to 5 microns, including sand, silt, rust, and sediments.
Protects Your System: This replacement filter shields other filters, extending their lifespan and enhancing performance.
Durable Construction: Made from high-quality, chemical-resistant polypropylene (PP) for reliability and longevity.
Convenient Lifespan: Designed to last up to 6 months, depending on water quality and usage.
LittleWell AEPF12FPT12X10 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Female Pipe Thread, 10 Pack, works the same as SharkBite (AEPF12FPT12X10)
3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.