iSpring
![]()
View
- Industry Standard Water Filter Housing
- For Reverse Osmosis Water Filter
- Fits 10"x2.5 standard filter cartridges, compatible to most RO systems.
- 1/4" Inlet / Outlet
- Made of Polypropylene
- It is not a replacement part for RCC7
View
- Fit iSpring Water Filter Housings for water filtration systems such as RCB3P , WCB32C and WCB32O.
- Approximate O.D.: 3 1/2”
- 1 O-ring included.
View
- [Classic Drinking Filter]: The water undergoes a three-stage purification process: PP sediment filtration, GAC carbon filter and a unique CTO filtration in the 3rd layer. This system efficiently removes common drinking water sediments such as dust,
View
- Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! WGB22B whole house water filter system removes up to 99% of chlorine from water as well as up to 95% of sediment, rust, tastes
View
- Stainless steel mesh filter screen rated at 50 Micron. Double threads on both ends: 1inch MNPT and 3/4 inch FNPT, 1/4" flush out fitting included. WSP series can be used for waste water treatment by spin down the sediment.
- Flushable and reusab
View
- Smart Flow Sensor Switch automatically powers on/off UV light by water flow
- Includes Transformer and Flow Sensor Switch. It works with 11W UV lamp
- The kit is part of iSpring UVF11A but can also be used to add Smart Flow Sensor to other 11w UV
View
- Replacement UV light bulb - Philips Brand- 11-Watt for UV filters.
- 11W Germicidal UV lamp, Fits iSpring UVF11B/UVF11A
- UV lamp is recommended to be replaced every 12-month to ensure its function.
- Approximate dimensions:
View
- 400GPD Commercial Reverse Osmosis Membrane with Matching Housing
- TFC (Thin Film Composite) membrane
- Rejects wide spectrum of impurities down to .0001 micron
View
- Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.75-inch RO faucet delivers clean and fresh water to you and your family.
- Your choice for drinking w
View
- Tested by independent third-party to meet NSF/ANSI standard, replacement filters for 5-stage reverse osmosis systems
- Standard sized 10" x 2.5"
- Fits iSpring RCC7, RCC7P, and most other RO systems that use standard sized filter housings inc
View
- Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! Our filters are specially designed to remove up to 99% of chlorine from water as well as sediment, rust, herbicides, industrial
View
- Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filt
View
- For adding an extra stage of filter to existing RO systems
- Includes: Clamps X2, Tubing x1, Male Elbow 1/4" in NPT to 1/4" push-in quick connect fitting X2, Stem Elbow 1/4" push-in quick connect fitting X2.
- Suitable for most RO systems in
View
- Ceramic valve disk for up to 1 million leak-free smooth turns
- Washer included
- No tools required for installation
View
- Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FC25 carbon block filter is specially designed to remove up to 99% of chlorine from water as well as various other contaminants that c
View
- Connect membrane to Reverse Osmosis System
- Comes with 2 clips
- Work with iSpring water RO system
iSpring HW12 10 inches Reverse Osmosis Water Filter Housing - White, 1/4 Inch (HW12)
Industry Standard Water Filter Housing
For Reverse Osmosis Water Filter
Fits 10"x2.5 standard filter cartridges, compatible to most RO systems.
1/4" Inlet / Outlet
Made of Polypropylene
It is not a replacement part for RCC7 series sold earlier than march 2020
iSpring ORF2 Replacement O-ring for WCB32C, WCB32O, and RCB3P Water Filter Systems (ORF2)
Fit iSpring Water Filter Housings for water filtration systems such as RCB3P , WCB32C and WCB32O.
Approximate O.D.: 3 1/2” 1 O-ring included.
iSpring ORM O-Ring for Reverse Osmosis Membrane Housing (ORM)
The O-ring is installed on both the lip of the RO membrane housing and inside the housing cap.
iSpring US31 Classic 3-Stage Under Sink Water Filtration System for Drinking, Tankless, High Capacity, Sediment GAC Carbon (Newest Version) (US31)
[Classic Drinking Filter]: The water undergoes a three-stage purification process: PP sediment filtration, GAC carbon filter and a unique CTO filtration in the 3rd layer. This system efficiently removes common drinking water sediments such as dust, sand, particles, dirt, and rust. Additionally, it effectively eliminates heavy metals, harmful chemicals, Chloramine, cloudiness, colors, chlorine taste, and odor. It's important to note that this under sink water filtration system DOES NOT lower TDS value but preserves the healthy minerals in your water. Enjoy pure, great-tasting water with essential minerals intact.
[Fresh Healthy Water Supplier]: The on-demand fast flow rate of the iSpring US31 allows it to meet the widest possible range of needs in your home. Up to 20x more effective than the common water pitcher dispenser. Flow Rate: Up to 1GPM depending on source water pressure. Maxim Pressure: 90psi. It washes fresh produce like fruit and vegetables, brings health protection, can provide your entire family with delicious, clean water straight from your tap.
[Excellent Quality and Design]: Features beautiful European-designed brushed nickel all-metal faucet and clear see-through 1st stage housing. Clear see-through 1st stage housing makes filter inspection a snap. Manufactured to comply strictly with FDA standards and tested by independent third party against NSF/ANSI standards (42, 53, 61) for water quality, material safety and structural integrity.
[Easy to Install and Maintain]: Designed for hassle-free installation and maintenance, the system includes a high-capacity sediment filter, GAC filter, and CTO carbon filter. The sediment filter protects and extends the life of your system, while the GAC and carbon filters efficiently remove harmful contaminants. Filters should be replaced every 6 to 12 months, depending on water quality.
[TDS Note and Customer Services]: This under sink water filter will not reduce the TDS of the incoming water. Instead, it keeps the healthy minerals in your water. If you are interested in a filter that removes TDS, please consider a iSpring reverse osmosis system.Backed by a 1-year Manufacturer with lifetime support from Atlanta, GA USA. For any issue or concern, please don't hesitate to contact us.
iSpring WGB22B 2-Stage Whole House Water Filtration System with 20" x 4.5” Fine Sediment and Carbon Block Filters, Removes 99% of Chlorine (WGB22B)
Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! WGB22B whole house water filter system removes up to 99% of chlorine from water as well as up to 95% of sediment, rust, tastes & odors, herbicides, industrial solvents, and various other contaminants. This whole house filter is installed at the main water supply line in order to treat all the water in your home.
DIY Installation and Maintenance: Refer to our manual and our helpful YouTube videos for easy DIY installation. With 1" NPT inlet / outlet and 20" x 4.5" filter cartridges, this whole home water filter system has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
Peace of Mind Customer Service: We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help! Register online to active extended manufacturer warranty with lifetime personalized support.
Please Note: Unlike an RO system, this whole house water filtration system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a water filter that removes TDS consider our iSpring Reverse Osmosis (RO) systems.
iSpring WSPGR - Reusable Spin Down Sediment Water Filter (50 Micron w/Scraper & 360°Head) (WSPGR)
Stainless steel mesh filter screen rated at 50 Micron. Double threads on both ends: 1inch MNPT and 3/4 inch FNPT, 1/4" flush out fitting included. WSP series can be used for waste water treatment by spin down the sediment.
Flushable and reusable, takes the considerable workload off finer filters that follow behind it; helps create a multi-layer gradient filtration system for better filtration results and longer filter life.
System can be installed in any direction thanks to the 360° rotatable head connection.
The steel mesh filter cartridge and housing can be easily cleaned by rotating the scraper, saving time and effort on routine maintenance.
Lifetime support from iSpring in Alpharetta, GA at (678) 261-7611
iSpring UVT11A 11-Watt 110-Volt UV Transformer Ballast with Smart Flow Sensor Switch (UVT11A)
Smart Flow Sensor Switch automatically powers on/off UV light by water flow Includes Transformer and Flow Sensor Switch. It works with 11W UV lamp The kit is part of iSpring UVF11A but can also be used to add Smart Flow Sensor to other 11w UV filters Resolves the issue that water gets heat up by UV light. Extends UV lamp life. Smart Flow Sensor Switch powers on/off automatically by water flow Complete upgrade Kit, can replace older UV transformer that stays on
iSpring UVB11 NSF/ANSI 58 Certified Ultra Violet UV Lamp Replacement UV Bulb for UV Water Filtration System, 11W/1 GPM/5/8" x 8 1/4" (UVB11)
Replacement UV light bulb - Philips Brand- 11-Watt for UV filters.
11W Germicidal UV lamp, Fits iSpring UVF11B/UVF11A
UV lamp is recommended to be replaced every 12-month to ensure its function.
Approximate dimensions: Dia 5/8" x 8 1/4" L (not including the pins)
Flow rate: 1GPM; Last 8,000 hours
100% SATISFIED CUSTOMERS: Extended manufacturer with lifetime personalized support from Atlanta GA.
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring UVQ11 11w UV Quartz Sleeve (Tube only) (UVQ11)
UV Quartz tube 3/8" Dia x 9 3/4"L
Fits UV Filters: #UVF11A, #UVF11B
iSpring MC4 2.8" x 12" 400GPD Water Filter Replacement Cartridge Reverse Osmosis Membrane, fits RE4T (MC4)
400GPD Commercial Reverse Osmosis Membrane with Matching Housing
TFC (Thin Film Composite) membrane
Rejects wide spectrum of impurities down to .0001 micron
iSpring GS3 Lead-Free Reverse Osmosis Water Filter Drinking Water Faucet, Non-Air Gap RO Faucet, Chrome Finish (GS3)
Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.75-inch RO faucet delivers clean and fresh water to you and your family.
Your choice for drinking water faucet if you prefer the look of a traditional RO faucet. Timeless coke-shaped style with high grade chrome finish makes it easy to match other fixtures in your kitchen.
Swivels 360-degree for ease of use. Featured durable ¼ turn wheel-shaped handle offers smooth operation.
Requires only a ½” drilled hole for easy installation; can accommodate larger pre-drilled holes with its cover plate(OD: 2.1”). One ¼” and one ¼” to ⅜” tube push to connect quick fitting included.
Backed by a 30-day money-back guarantee, 3-year limited manufacturer warranty, and lifetime tech support from iSpring Water Systems at (678)261-7611 in Atlanta, GA.
iSpring F7RO 10"x2.5" Standard Reverse Osmosis Water Filter 1-year Replacement Cartridges, 7-piece (F7RO)
Tested by independent third-party to meet NSF/ANSI standard, replacement filters for 5-stage reverse osmosis systems
Standard sized 10" x 2.5"
Fits iSpring RCC7, RCC7P, and most other RO systems that use standard sized filter housings including Flowmatic, PuROLine, Crystal Quest, and Apec
Includes 2x FP15 sediment filters, 2x FG15 GAC filters, 2x CTO carbon filters, and 1x FT15 post carbon filter. (No RO membrane included)
Each filter is individually wrapped
iSpring F3WCB32 2.5” x 20” Whole House Water Filter Replacement Set - One Sediment Cartridge and Two Carbon Block Cartridges - Fits WCB32C & WCB32O (F3WCB32)
Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! Our filters are specially designed to remove up to 99% of chlorine from water as well as sediment, rust, herbicides, industrial solvents, and various other contaminants.
DIY Installation and Maintenance: Refer to our manual and our helpful YouTube videos for DIY installation. Our filter set fits standard 20” x 2.5” housings, including brand name models.
The first stage high capacity sediment filter is able to achieve filtration down to 5 microns. The second and third stage CTO Carbon Block filters are made of coconut shell carbon to increase filtration efficiency and extend filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. Both filters have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year (depending on your water quality)
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP25 20” x 2.5” Water Filter Replacement Cartridges - Fine Sediment Filter - 5 Micron - Fits Standard 20” x 2.5” Water Filtration Systems (FP25)
Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 20” x 2.5” housings, including brand name models.
The FP25 polypropylene sediment filter is able to achieve filtration down to 5 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year (depending on your water quality). Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring ACL1 Reverse Osmosis Add-on Filter Kit (ACL1)
For adding an extra stage of filter to existing RO systems
Includes: Clamps X2, Tubing x1, Male Elbow 1/4" in NPT to 1/4" push-in quick connect fitting X2, Stem Elbow 1/4" push-in quick connect fitting X2.
Suitable for most RO systems in the market
Push-in quick connect fittings offer DIY installation with no tools required
iSpring AFW43 Feed water adapter, Sliver (AFW43)
Ceramic valve disk for up to 1 million leak-free smooth turns
Washer included
No tools required for installation
iSpring FC25 High Capacity 20” x 2.5” Water Filter Replacement Cartridges - CTO Carbon Block - Fits WCB32C, WCB32O, and RCB3P (FC25)
Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FC25 carbon block filter is specially designed to remove up to 99% of chlorine from water as well as various other contaminants that cause unpleasant odors and tastes.
Standard Size: Our filter set fits standard 20” x 2.5” housings, including brand name models.
Our FC25 CTO Carbon Block filters are made of coconut shell carbon to increase filtration efficiency and extend filter life. They are tested by an independent third-party to meet NSF/ANSI standards. The filters have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year. Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring ACN23X2 Add-on Filter to Membrane Clamps #ACN23 Set of 2, White 2 Piece (ACN23X2)
Connect membrane to Reverse Osmosis System
Comes with 2 clips
Work with iSpring water RO system
LittleWell 702KX10 1/4" x 1/4" x1/4" Quick Connect Push Fitting TEE splitter, 0404UTX10 702KX10, Pack of 10 (0404UTX10 (702KX10))
1/4" x 1/4" x 1/4" OD. T-splitter 10 included