iSpring
![]()
View
- Replacement faucet filter for iSpring DF1/DF2 Faucet Mount Filter System. Get your filtered water right from your tap for drinking, cooking, and washing.
- iSpring FDF1 faucet filter can reduce chlorine, chloramine, cysts, lead, mercury, li
View
- Stainless steel mesh filter screen rated at 50 Micron. WSP series can be used for waste water treatment by spin down the sediment.
- Ideal first layer of filtration before a larger filtration system
- Flushable and reusable, takes the workloa
View
- [Two-Stage Water Filtration] 1st-Stage 5-micron polypropylene sediment filter (FP15B) captures dirt, sand, silt, dust, rust, and scale particles and extends the life of CTO carbon block filter. Using quality coconut shell carbon and highly compac
View
- 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wast
View
- 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wast
View
- 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wast
View
- 3/4" Push Fit Elbow Fitting to make a 90-degree connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe.
- Push to Connect pipes, quick and easy installation in seconds. It can also be used for waste water processing.
View
- 3/4" Push Fit Elbow Fitting to make a 90-degree connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe.
- Push to Connect pipes, quick and easy installation in seconds. It can also be used for waste water processing.
View
- 3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination
View
- 3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination
View
- 3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination
View
- 1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wit
View
- 1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wit
View
- 1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wit
View
- 3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wi
View
- 3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wi
View
- 3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
- Used to connect copper, CPVC or PEX pipes in any combination wi
View
- 3/4'' Push Fit Ball Valve to connect systems.
- Single lever control can be rotated after installing for easy use.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wa
View
- 3/4'' Push Fit Ball Valve to connect systems.
- Single lever control can be rotated after installing for easy use.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wa
View
- 3/4'' Push Fit Ball Valve to connect systems.
- Single lever control can be rotated after installing for easy use.
- Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for wa
iSpring FDF1 Faucet Filter Replacement Cartridge for DF1/DF2 Series Water Filtration System, 500 Gallons (FDF1)
Replacement faucet filter for iSpring DF1/DF2 Faucet Mount Filter System. Get your filtered water right from your tap for drinking, cooking, and washing.
iSpring FDF1 faucet filter can reduce chlorine, chloramine, cysts, lead, mercury, lindane, atrazine, and many other contaminants in water from faucets in your kitchen sink, bathroom sink, or RV sink.
Thanks to this filter cartridge, iSpring DF1/DF2 series sink water filter faucet can deliver up to 500 gallons of clean filtered water. This means that you will only need to change your faucet water filter once every 6-8 months.
Up to 1.5 GPM filtration rate; nice and steady flow of water.
Easy tool-free change in a few minutes.
30-day money back guarantee; lifetime tech support from iSpring at (678)261-7611.
iSpring WSP50+AHPF12MNPT12X2 Reusable Spin Down Sediment Water Filter with Push Fit Ball Valve (WSP50+AHPF12MNPT12X2)
Stainless steel mesh filter screen rated at 50 Micron. WSP series can be used for waste water treatment by spin down the sediment.
Ideal first layer of filtration before a larger filtration system
Flushable and reusable, takes the workload off finer filters that follow behind it; helps create a multi-layer gradient filtration system for better filtration results and longer filter life
See through housing offers easy visual monitoring; lead-free brass body with 1-year warranty
Double threads on both ends: 1 inch MNPT and 3/4 inch FNPT, flush out valve has garden hose barb fitting
iSpring WGB21B+AH12MN16X2 2-Stage Whole House Water Filtration System with 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WGB21B+AH12MN16X2)
[Two-Stage Water Filtration] 1st-Stage 5-micron polypropylene sediment filter (FP15B) captures dirt, sand, silt, dust, rust, and scale particles and extends the life of CTO carbon block filter. Using quality coconut shell carbon and highly compact fabrication tech, 2nd-stage CTO filter(FC15B) knocks out cloudiness as well as bad tastes and odors, removes over 90% of chlorine, and is effective on herbicides and industrial solvents.
[Filtration Capacity] 10"x4. 5" replaceable whole house water filters can provide up to a full year of clean water(up to 50, 000 gallons) for a family of four. 1-inch inlet and outlet ports allow fast water flow with less pressure loss. Fine PP sediment filter and quality CTO filter not only bring clean and fresh water to every faucet in your house, but also help prolong the lives of your water-using appliances and protect plumbing from sediment and scale buildup.
[Easy Installation and Filter Change] Comes pre-assembled onto the mounting bracket for a streamlined, DIY installation. Two 3/4" Push-Fit Braided SS Hose Connectors included. Wrench included for easy and quick filter changes. A pressure release valve allows for the release of built-up pressure when changing filters. Refer to our manual and YouTube videos to Install this point-of-entry(POE) filtration system at the main water supply to get clean water for the entire family.
[Peace-of-mind Customer Service] Backed by a 30-day money-back and extended manufacturer upon registration at iSpring. Lifetime tech support(678-261-7611) from Atlanta, GA USA.
[TDS and Filter Pack Note] Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems. Value filter packs(F2WGB21B or F4WGB21B) available to meet your filter change needs.
LittleWell ATPF81212X2 Brass 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee, 2 Pack, works the same as SharkBite (ATPF81212X2)
3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell ATPF81212X4 Brass 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee, 4 Pack, works the same as SharkBite (ATPF81212X4)
3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell ATPF81212X10 Brass 3/4''X 3/4''X 1/2'' Push Fit Reducer Tee, 10 Pack, works the same as SharkBite (ATPF81212X10)
3/4''X 3/4''X 1/2'' Push Fit Reducer Tee to connect from 3/4'' pipes and reduce down to at the tee to 1/2 '' pipe. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12X4 Brass 3/4" Push Fit Elbow Fitting, 4 Pack, works the same as SharkBite (AEPF12X4)
3/4" Push Fit Elbow Fitting to make a 90-degree connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe. Push to Connect pipes, quick and easy installation in seconds. It can also be used for waste water processing.
LittleWell AEPF12X10 Brass 3/4" Push Fit Elbow Fitting, 10 Pack, works the same as SharkBite (AEPF12X10)
3/4" Push Fit Elbow Fitting to make a 90-degree connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe. Push to Connect pipes, quick and easy installation in seconds. It can also be used for waste water processing.
LittleWell AEPF12FPT12X2 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Female Pipe Thread, 2 Pack, works the same as SharkBite (AEPF12FPT12X2)
3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12FPT12X4 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Female Pipe Thread, 4 Pack, works the same as SharkBite (AEPF12FPT12X4)
3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12FPT12X10 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Female Pipe Thread, 10 Pack, works the same as SharkBite (AEPF12FPT12X10)
3/4'' Push Fit X 3/4'' NPT Female Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. female NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF8MPT8X2 Brass 90-Degree Elbow Fitting-1/2'' Push Fit X 1/2'' NPT Male Pipe Thread, 2 Pack, works the same as SharkBite (AEPF8MPT8X2)
1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF8MPT8X4 Brass 90-Degree Elbow Fitting-1/2'' Push Fit X 1/2'' NPT Male Pipe Thread, 4 Pack, works the same as SharkBite (AEPF8MPT8X4)
1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF8MPT8X10 Brass 90-Degree Elbow Fitting-1/2'' Push Fit X 1/2'' NPT Male Pipe Thread, 10 Pack, works the same as SharkBite (AEPF8MPT8X10)
1/2'' Push Fit X 1/2'' NPT Male Pipe Thread to make a 90-degree connection to 1/2'' pipe using the push-it connection and gives you a 1/2 in. male NPT adapter on the opposite end. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12MPT12x2 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Male Pipe Thread, 2 Pack, works the same as SharkBite (AEPF12MPT12X2)
3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12MPT12x4 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Male Pipe Thread, 4 Pack, works the same as SharkBite (AEPF12MPT12X4)
3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell AEPF12MPT12x10 Brass 90-Degree Elbow Fitting-3/4'' Push Fit X 3/4'' NPT Male Pipe Thread, 10 Pack, works the same as SharkBite (AEPF12MPT12X10)
3/4'' Push Fit X 3/4'' NPT Male Pipe Thread to make a 90-degree connection to 3/4'' pipe using the push-it connection and gives you a 3/4 in. male NPT adapter on the opposite end.
Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell ABPF12X2 Brass 3/4'' Push Fit Ball Valve,2 Pack, works the same as SharkBite (ABPF12X2)
3/4'' Push Fit Ball Valve to connect systems. Single lever control can be rotated after installing for easy use. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell ABPF12X4 Brass 3/4'' Push Fit Ball Valve, 4 Pack, works the same as SharkBite (ABPF12X4)
3/4'' Push Fit Ball Valve to connect systems. Single lever control can be rotated after installing for easy use. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.
LittleWell ABPF12X10 Brass 3/4'' Push Fit Ball Valve, 10 Pack, works the same as SharkBite (ABPF12X10)
3/4'' Push Fit Ball Valve to connect systems. Single lever control can be rotated after installing for easy use. Used to connect copper, CPVC or PEX pipes in any combination with no glue, welding, clamps or unions. It can also be used for waste water processing.