Whole House Water Filter Systems Made with Quality
The First Stage Water Filter
iSpring Multi-layer The first stage of iSpring WGB32B whole house water filter system is a sediment water filter.
iSpring FP25B Multi-layer filtration allows for fewer clogs and minimal pressure loss. This water filter is specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust that can clog the filters that follow.allows for less clogs and minimal pressure loss.
The Second & Third Stages Water Filters
The second and third stages of the iSpring WGB32B whole home water filter system are carbon water filters.
iSpring FC25B carbon block water filter uses high-quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life. It filters up to 100,000 gallons of water (or lasts up to 12 months). Two CTO water filters combined to deeply remove up to 99% of chlorine from water, as well as color, cloudiness, and various taste and odor compounds.
iSpring Whole Home Water Filtration Systems
iSpring WGB32B whole house water filtration system should be installed at the point of entry to treat the water of your whole house.
Cooking, bathing, and washing clothes with filtered water keeps you away from bad-tasting, smelly, and contaminated water that does harm to your health.
The filtered water also helps to extend the lifespan of your plumbing system and the household appliances, releasing your burden on plumbing repair and replacements.
Frequently Asked Question
Q: With this whole house water filter system, do I still need to install a water softener if my water is very hard?
A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 300 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
It is recommended that you install this WGB32B whole home water filtration system after your water softener to achieve optimal performance if you have hard water.
Product Features
- Peak Flow Rate: 15 GPM
- Minimum Working Pressure: 25 psi
- Maximum Working Pressure: 80 psi
- Operating Temperature: 40-100 °F
- pH Range: 6 - 11
- Easy DIY Install
- 1 inch NPT inlet/outlet
High Capacity with No Pressure Loss
Depending on your water quality and water use, this whole home water filter system can provide you and your family up to a full year of clean water with no pressure loss.
Save on your water bill - WGB32B whole house water filter won’t produce any wastewater.
A high flow rate of up to 15 gallons per minute.
Easy Installation and Filter Change
The whole house filter is built with 1-inch NPT inlet / outlet.
Refer to our manual and helpful YouTube videos for easy installation.
Drain the remaining water and twist off the housings. Filter replacement is a breeze.
To prevent leakage, please check out our video on How to Apply Plumber’s Tape Correctly
If you encounter any leakage during installation or filter changes, please let us know, and we will make it right for you.
Test before Purchase for Well Water Users
If you are on well water, we recommend getting your water tested before purchasing this water filter for the best results. If you have any questions or need any product recommendations, please feel free to reach out. We are happy to help!
iSpring Water Filters Whole House don’t remove TDS or Total Dissolved Solids. If you need a system that removes TDS, please instead check out our reverse osmosis systems.
Give You a Peace of Mind
We offer tech and CS support via phone and email from Atlanta, GA.
Contact our responsive and professional team for product selection that suits your water filtration needs.
Now, and years to come, we will be right here and ready to help.
Please refer to our video and manual for the installation guide. If you have any questions or difficulties during or after installation, feel free to reach out! We stand behind our products and are always here to help!
- Filter Size
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 11" x 63.5"
- Filtration Capacity
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 150,000 Gallons
- Up to 1,000,000 Gallons
- Water Pressure Delivered
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 26 GPM
- Reduces Chlorine, Taste, and Odor
- Up to 99%
- Up to 99%
- Up to 99%
- Up to 99%
- -
- Up to 99.9%
- Reduces Iron and Manganese
- -
- Iron: Max 3.0 ppm down to 0.01 ppm Manganese: Max 1.0 ppm down to 0.01 ppm
- -
- -
- -
- -
- Reduces Lead
- -
- -
- 150k gal at 100 ppb
- -
- -
- 99.4% reduction at 150 ppb
- Prevents and Reduces Scale and Corrosion
- -
- -
- -
- -
- -
- Filtration
- Sediment & Chlorine Reducing
- Sediment & Chlorine Reducing
- 5 Micron Sediment Reducing
- Chlorine Reducing
- -
- Media
- PP Carbon Block
- PP Carbon Block
- Polypropylene
- Coconut Shell Carbon
- Water Leak Detector Alarm System with Automatic Shut-Off Valve
- Recommended replacement cycle
- Every 6-12 months
- Every 6-12 months
- Up to 100,000 Gallons (12 Months)
- Up to 100,000 Gallons (12 Months)
- -
- Size
- 4.5” x 20”
- 4.5” x 20”
- 4.5” x 20”
- 4.5” x 20”
- 3/4” NPT thread 20 feet water sensor x2
Product Description
WGB32B100ARJBP combines the iSpring WGB32B whole house water filtration system with the iSpring WSP100ARJ-BP spin-down sediment prefilter, providing a comprehensive point-of-entry water filtration solution. The WGB32B effectively removes fine sediment, chlorine, and contaminants that affect taste and odor, delivering cleaner water throughout your entire home. Meanwhile, the WSP100ARJ-BP prefilter intercepts larger debris and particulates before they reach the main filtration system, offering superior protection with its large capacity and high flow rate.
The WGB32B is a 3-stage filtration system designed for homes with multiple bathrooms or higher water demands. It features a 20-inch sediment filter as the first stage, followed by two carbon block filters that reduce up to 99% of chlorine and eliminate rust, bad taste, and odors. With a 1-inch NPT inlet/outlet and a flow rate of up to 15 GPM, the system can handle high water flow without sacrificing pressure, ensuring consistent water quality across your home. The WGB32B is also designed for easy DIY installation, using standard cartridges and requiring minimal tools for setup.
The included WSP100ARJ-BP spin-down prefilter offers a robust first layer of filtration, capturing larger particles like sand, silt, and rust. Its jumbo 1-gallon capacity is 22 times larger than standard sediment filters, and it supports a maximum flow rate of 25 GPM, making it ideal for homes with high water usage. The prefilter features a clear housing for easy visual inspection, a touch-screen auto-flush module with multiple flushing modes (auto, semi-auto, manual), and a bypass valve for easy maintenance and cleaning. With universal fittings (1" MNPT and ¾" FNPT), it’s compatible with most whole house systems and allows for easy integration.
Together, this bundle offers an all-encompassing filtration solution that protects your plumbing, appliances, and water outlets from sediment, chlorine, and other contaminants. The prefilter’s ability to capture large debris helps extend the life of the main filtration system, reducing the frequency of maintenance and filter changes. This ensures that your home enjoys high-quality water with minimal hassle. The system’s high flow capacity, ease of installation, and low-maintenance design make it an ideal choice for homeowners looking for a durable, professional-grade solution that’s still simple to install and maintain.