iSpring RO800G Tankless RO Reverse Osmosis Water Filtration System, 800 GPD Fast Flow, Up to 2.5:1 Pure to Drain Ratio, Gray
Couldn't load pickup availability
- Free Shipping
- 1-Year Warranty
- 30-Day Return
- Lifetime Tech Support
Features
Display and Operating Area
- Press “Select” for 5 seconds. The machine will start the flush process that lasts for 30 seconds. During the process, the red light will flash.
- The “ON” light flashes when the system is running and filtered water is being dispensed. This light remains on when the system is in standby mode.
- Filter life indicating lights remain white and start to blink in white when the corresponded filter life has less than 10% remaining, then turn red when the filter needs to be replaced ASAP.
Unbeatable Performance
RO800G membrane is rated at 800 gallons per day with up to 2.5:1 pure water to wastewater ratio and a flow rate of up to 0.6 gallon per minute, which is more than 750% more efficient than a traditional reverse osmosis system. It also helps to reduce the TDS. Plug and play with automatic pre-flush and filter life reminders on the system.
Tankless design, quick installation process, click and lock filters
iSpring RO800G’s tankless design saves up to 750% of water than traditional RO Systems. With a detailed instruction manual, it is easy to install and maintain. And the filter can be changed in seconds, which making it one of the most advanced RO water filtration systems.
PP+CTO Composite Filter + Advanced RO Membrane
2-Stage Filtration Performance
Stage 1 (FPPC):
- The composite filter utilizes a multi-layer design and removes dirt, sand, silt, rust, and scale particles, absorbs THMs, VOCs, and pesticides
- Removes unpleasant chlorine, taste, odors, cloudiness, and colors.
- Replaced every 6 - 12 month
Stage 2（MRO800）:
800GPD high flow reverse osmosis membrane
- Rejects a wide spectrum of impurities down to 0.0001 micron.
- Removes heavy metals and many organic matters.
- Replaced every 24-36 month
- The actual filter replacement cycle varies depending on the source water quality actual usage of the system. The time between each filter replacement should not exceed the maximum suggested data.
iSpring vs Other Brands
