iSpring GS3 Lead-Free Reverse Osmosis Water Filter Drinking Water Faucet, Non-Air Gap RO Faucet, Chrome Finish
$39.99
About this item
- Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.75-inch RO faucet delivers clean and fresh water to you and your family.
- Your choice for drinking water faucet if you prefer the look of a traditional RO faucet. Timeless coke-shaped style with high grade chrome finish makes it easy to match other fixtures in your kitchen.
- Swivels 360-degree for ease of use. Featured durable ¼ turn wheel-shaped handle offers smooth operation.
- Requires only a ½” drilled hole for easy installation; can accommodate larger pre-drilled holes with its cover plate(OD: 2.1”). One ¼” and one ¼” to ⅜” tube push to connect quick fitting included.
- Backed by a 30-day money-back guarantee, 3-year limited manufacturer warranty, and lifetime tech support from iSpring Water Systems at (678)261-7611 in Atlanta, GA.
iSpring GS3 Lead-Free Reverse Osmosis Water Filter Drinking Water Faucet, Non-Air Gap RO Faucet, Chrome Finish
$39.99
- Availability: In Stock
- Model: GS3
- Manufacturer: iSpring
Reviews with images
Write Review
0 0 |
2018-04-09
The most difficult part of the job was drilling a hole in my granite countertop. Good faucet, does the job.
2018-04-09
The most difficult part of the job was drilling a hole in my granite countertop. Good faucet, does the job.
Eric Larreau |
2019-02-04
This faucet looked great and worked perfectly for 3 years 4 months, which is pretty good considering the heavy use we subject it to. I just got a second one and I expect it to last at least as long. All the other brands we tried never held up this well. Should the second faucet not hold up as well, I will return and amend this review. Very happy with this purchase.
2019-02-04
This faucet looked great and worked perfectly for 3 years 4 months, which is pretty good considering the heavy use we subject it to. I just got a second one and I expect it to last at least as long. All the other brands we tried never held up this well. Should the second faucet not hold up as well, I will return and amend this review. Very happy with this purchase.
Dawn Slauter |
2017-09-01
Love this filtered water faucet. Its high enough that I can get a lobster pot under it easily, and the handle on the right side is cute - a little "old fashioned looking but nice!
2017-09-01
Love this filtered water faucet. Its high enough that I can get a lobster pot under it easily, and the handle on the right side is cute - a little "old fashioned looking but nice!
Tom Taylor |
2017-04-28
I bought 3 of these to replace older water filter faucets. The angled arm made the distance needed over the sink. The handle works better than a lever style. The installation went fine. I am satisfied with the product.
2017-04-28
I bought 3 of these to replace older water filter faucets. The angled arm made the distance needed over the sink. The handle works better than a lever style. The installation went fine. I am satisfied with the product.
Scott Smith |
2016-11-27
It worked great for one year. Exactly one year, then it started dripping faster and faster. At this point it is more than a gallon in 8 hours. I know, because we put a gallon pitcher under it to catch the drip. I looked to see if there are replacement seals for it but so far I cant find any way to fix it even though it does disassemble nicely. It does look nice and worked great while it, well... , worked. Disappointing.UPDATE: So after I couldnt find replacement seals I carefully took it apart paying attention to where things went. I carefully washed the parts (especially the white plastic parts that seal off the water flow) and applied a light layer of food-grade lube and re-assembled it. It works fine again. It totally seals and doesnt drip. It is made well enough to be user serviceable, which is impressive. Well see how long it goes before it starts losing its seal and dripping again.
2016-11-27
It worked great for one year. Exactly one year, then it started dripping faster and faster. At this point it is more than a gallon in 8 hours. I know, because we put a gallon pitcher under it to catch the drip. I looked to see if there are replacement seals for it but so far I cant find any way to fix it even though it does disassemble nicely. It does look nice and worked great while it, well... , worked. Disappointing.UPDATE: So after I couldnt find replacement seals I carefully took it apart paying attention to where things went. I carefully washed the parts (especially the white plastic parts that seal off the water flow) and applied a light layer of food-grade lube and re-assembled it. It works fine again. It totally seals and doesnt drip. It is made well enough to be user serviceable, which is impressive. Well see how long it goes before it starts losing its seal and dripping again.
Robert Harvey |
2016-09-01
This was one of the finest faucets Ive bought. Reliable and nice looking. Plus, it was easy to install. Ill buy from this company again.
2016-09-01
This was one of the finest faucets Ive bought. Reliable and nice looking. Plus, it was easy to install. Ill buy from this company again.
Jose Lopez-Zeno |
2016-06-11
The perfect drinking water faucet! This is the fourth drinking water faucet I have purchased and by far my favorite - and also the least expensive! I couldnt be happier.PROS:Smaller and slanted profile doesnt get in the way of over-the-sink shelves (the reason I had to buy a replacement).Uses standard 1/4" threaded tube - can connect with an icemaker hose with no adapters.(No adapters means no leaks and no restricted water flow)Base plate is large enough to cover a soap dispenser hole re-purposed for the faucet.CONS:None. I was afraid the old knob style might look funky, but it looks good and turns easily.
2016-06-11
The perfect drinking water faucet! This is the fourth drinking water faucet I have purchased and by far my favorite - and also the least expensive! I couldnt be happier.PROS:Smaller and slanted profile doesnt get in the way of over-the-sink shelves (the reason I had to buy a replacement).Uses standard 1/4" threaded tube - can connect with an icemaker hose with no adapters.(No adapters means no leaks and no restricted water flow)Base plate is large enough to cover a soap dispenser hole re-purposed for the faucet.CONS:None. I was afraid the old knob style might look funky, but it looks good and turns easily.