Experience the iSpring Difference
-
First Stage PP Sediment Removal Water Filter
Multi-layer filtration for fewer clogs and minimal pressure loss.>
Specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust.>
-
Second Stage Composite Water Filter
Reduces chlorine, lead, mercury, hydrogen sulfide, heavy metals, herbicides, odors, and more for cleaner water.>
For households with high TDS levels (>300 ppm), pair this filter with a water softener such as the iSpring WCS45KG to
maximize filtration efficiency and extend system life.>
-
Third Stage Carbon Block Water Filter
iSpring FC15B carbon block water filter uses premium coconut shell carbon and advanced fabrication for optimal
efficiency and longevity.>
It filters up to 50,000 gallons (or lasts up to 12 months), removing up to 99% of chlorine, as well as color,
cloudiness, and various tastes and odors from water.>
-
Compact Yet Powerful
Perfect for apartments, small homes, or vacation properties, this whole house water filter system delivers long-lasting,
high-performance filtration while fitting into tight spaces.>
Three stages provide more thorough contaminant removal than standard 2-stage systems.>
DIY Installation
A Team You Can Count On
Recommended Setup Order
Do I still need a water softener if my water is hard?
Yes. Our WGB31B-KS whole house water filter system does not reduce hardness. It is recommended to install a water softener, such as the iSpring WCS45KG model, before this system if your TDS level is above 300 ppm.
What contaminants can this system remove?
Turbidity, visible particulate matter, sand, silt, dirt, rust, chlorine, taste, odor, THMs, VOCs, chemicals, hydrogen sulfide, herbicides, heavy metals like lead, mercury, and more.
Can I install this system outdoors?
Install indoors in a well-ventilated area, shielded from wind and rain, away from direct sunlight and heat. Consider water leakage protection. For outdoor installation, ensure insulation for frost, sun, and waterproofing for both unit and pipes.
Can I use this system if my water flow is from left to right?
Yes, you can. However, please note that the inlet/outlet marking on the system is fixed, so you will need to flip the machine head to accommodate this setup. To do this, simply unscrew the screws on the machine head and flip it.
Specifications
- Minimum Working Pressure: 25 psi
- Maximum Working Pressure: 80 psi
- Operating Temperature: 40-100 ºF
- pH Range: 6 - 9
- Inlet/Outlet: 1 inch Female NPT