Search
Search Criteria
Products meeting the search criteria
iSpring ATRF500 Transformer for 400/500 GPD RO System Booster Pump, 100-240VAC 2.5A to 36VDC 3.33A, fits RCS5T (pump #PMP500 sold separately) (ATRF500)
Boosts pressure up to 80 psi Can be mounted in several positions Safe power operation with low energy consumption ( low Voltage - 36 volt) Transformer is not included; 3/8 inch fitting Works with 500Gpd 400Gpd ro systems. Compatible with most reverse osmosis systems in the market
iSpring HC14-2PP Clear Housing, 1/2" Inlet/ Outlet with 2X FP15 10" x 2.5" Sediment Filter (HC14-2PP)
Size: 1/2" Reinforced Inlet/Outlet Connectors Fits 10"x2.5" Standard Filter Cartridges 2 x FP15 Sediment Filter included Tested by Independent Third-Party to Meet NSF/ANSI Standard Lifetime support from iSpring in Atlanta, GA at (678) 261-7611
iSpring FC15BX4 4.5x10 in. 5 micron Carbon Block (CTO) Water Filter Replacement Cartridge for Under Sink and Whole House Water Filtration Systems, Pack of 4 (FC15BX4)
Using quality coconut shell carbon and highly compact fabrication tech, this activated carbon block CTO(Chlorine, Taste, and Odor) filter cartridge is designed and produced to achieve filtration efficiency and long filter life for 10" Whole House and Undersink Water Filtration Systems. Free of surfactants, binders, and adhesives. No leaching carbon ash.
Knocks out cloudiness as well as bad tastes and odors, removes up to 99% of chlorine, and is effective on herbicides and industrial solvents and other contaminants like trihalomethanes. Steady flow and high absorption.
Each cartridge filters up to 50,000 gallons depending on the use and feed water quality. Replace the filter every 6 months or every 50,000 gallons of water for ideal performance, depending on the quality of source water and daily water consumption.
Fits standard 10"x4.5" filters. Official 2nd stage Carbon Block replacement filter cartridge for iSpring under sink water filter US21B and whole house water filtration system WGB21B; 1st stage for WGB21BM and WGB21B-PB. All 4 cartridges are individually sealed for freshness.
Your iSpring shopping experience is backed by a 30-day money-back guarantee, extended warranty upon registration, and lifetime tech support from iSpring in Atlanta, GA at (678) 261-7611.
iSpring FCT10 Replacement Cartridge for CT10 Countertop Multi Filtration Drinking Water Filter Dispensers (FCT10)
A drinking water filter cartridge that combines dual-layered sediment filtration, activated carbon, KDF media, and calcite. Official replacement filter cartridge for iSpring countertop drinking water dispenser CT10.
Reduces sediment, dust, rust, particles, chlorine, lead, arsenic, heavy metals, and more. Also removes unpleasant chlorine taste and odor.
Out of Stock
$39.99
iSpring HC16FP15X1 Whole House Transparent Water Filter Housing 10-Inch 3/4-Inch FNPT Inlet/Outlet with 1 x 5 Micron Sediment Filters (HC16FP15X1)
Size: 3/4" Stainless Steel Reinforced Inlet/Outlet Connectors
Fits 10"x2.5" Standard Filter Cartridges
Helps to Protect Residential Appliances and Home Pluming from Sediment, Rust, Scale, Dirt, Coarse Sand, Sand, Silt, Bad Taste, Odor, Aesthetic and Chlorine Taste (depending on filter cartridge)
Tested by Independent Third-Party to Meet NSF/ANSI standard
Lifetime support from iSpring in Alpharetta, GA at (678) 261-7611
iSpring FP15X8 5 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 8-Pack (FP15X8)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5" (O. D) x 10" (Length) x 1 1/8" (I. D), Fits industry standard 10" filter housings
Good for RO, Counter-top, Whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge supply
Tech support from Atlanta GA (678)261-7611(M-F 8;30-5:30 EST)
iSpring FP110X2 10 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 2-Pack (FP110X2)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), 10 micron filter fits industry standard 10 inch filter housings
Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge supply
Tech support from Atlanta GA (678)261-7611 M-F 9-5 EST
iSpring FP110X4 10 micron 10" x 2.5" Standard Sediment Water Filter Replacement Cartridges, 4-Pack (FP110X4)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), 10 micron filter fits industry standard 10 inch filter housings
Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge supply
Tech support from Atlanta, GA (678)261-7611 M-F 9-5 EST
iSpring FP110X8 10 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 8-Pack (FP110X8)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), 10 micron filter fits industry standard 10 inch filter housings
Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge supply
Tech support from Atlanta GA (678)261-7611 M-F 9-5 EST
iSpring FP120 NSF/ANSI 58 Certified 20 micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-layer (FP120)
This filter can also be used for pool and hottub.
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FP120X2 20 Micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-Layer, 2-Pack (FP120X2)
Tested by independent third-party to meet NSF/ANSI standard
Made of 100% Melt-blown polypropylene, multi-layer filtration
Fits standard 10 inch housings, including name brand models. This filter can also be used for pool and hottub.
iSpring FP120X4 20 micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-layer, 4-Pack (FP120X4)
Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
Made of 100% Melt-blown polypropylene, multi-layer filtration
Fits standard 10 inch housings, including name brand models
iSpring FP120X8 20 micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-layer, 8-Pack (FP120X8)
This filter can also be used for pool and hottub.
iSpring FP11 NSF/ANSI 58 Certified 1 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP11)
This filter can also be used for pool and hottub.
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FP11X2 1 micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-layer, 2-Pack (FP11X2)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name model.
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP11X4 1 Micron 10"x 2.5" Standard Sediment Water Filter Replacement Cartridges, 4-Pack (FP11X4)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name model.
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP11X8 1 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 8-Pack (FP11X8)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name model.
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP150 NSF/ANSI 58 Certified 50 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP150)
Typically the first stage for any water filtration system, the sediment filter removes dirt, rust, sand, and other particles from the water. This filter can also be used for pool and hottub.
Made of 100% Melt-Blown Polypropylene, multi-layer filtration.
Depending on your water usage and quality, it should be replaced every 3-6 months.
ANSI/NSF STANDARD 42 COMPONENT - Tested by independent third-party. Genuine iSpring filter sold directly by the manufacturer.
Fits standard 10" filter housings, including most name brand models.
WELL PACKED and individually wrapped
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FP150X2 50 Micron 10" x 2.5" Standard Sediment Water Filter Replacement Cartridges, 2-Pack (FP150X2)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name model.
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP150X4 50 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 4-Pack (FP150X4)
The first stage for any water filtration system, the sediment filter removes dirt, rust, sand, and other particles from the water. This filter can also be used for pool and hottub.
Made of 100% Melt-blown polypropylene, multi-layer filtration
Depending on your water usage and quality, it should be replaced every 3-6 months
Tested and certified by independent third-party to meet NSF/ANSI standard 42. Genuine iSpring filter sold directly by Manufacturer
Fits standard 10 inch filter housings, including most Name brand models