iSpring
![]()
iSpring FP110X25 10 Micron, 25 Pack 10" x 2.5" Universal Multi-layer Sediment Water Filter Replacement Cartridges, White, 25 Piece (FP110X25)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name models
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring PMP1000 Water Booster Pump for High Capacity RO Membrane and Commercial Reverse Osmosis System Up to 120 psi, 3/8” Quick Connect Fitting (PMP1000)
PMP1000 is designed to boost water pressure up to 120 psi. Optimizes water filtration performance on high capacity reverse osmosis membrane and commercial ro systems
Great option for iSpring CRO1000 and systems with low feed water pressure
Automatic turns on and off with water system
Minimum working pressure: 30psi. Maximum working pressure: 120psi; Temperature Range: 40°-100°F
Package includes: PMP1000, power supply, 10ft 3/8” tubing, and spare fittings
iSpring ALS3 Leak Detector and Shut-Off Valve for iSpring Reverse Osmosis and iSpring Under Sink Water Filtration Systems with 3/8” Quick Connect, White (ALS3)
The shut-off valve protects your home and business properties from costly water damage by automatically shutting off the incoming water supply once the pad detects a potential water leakage
Just take out the screw and twist the unit to open for pad replacement. The pad needs to be replaced every time it touches the water and expands
3/8” quick connect: Fits⅜” tubings
Peace of mind customer service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Work with iSpring ALS1P3 replacement pads
iSpring ORB1X2 Replacement O-ring for 10" X4.5" Undersink and Whole House Water Filtration Systems, Pack of 2 (ORB1X2)
Standard Size: The 2 o-rings included are 5.8” in diameter and fit most standard 10"x4.5" undersink water filter systems(e.g. iSpring US21B), whole house water filtration systems(e.g. iSpring WGB21B, WGB21BM, WGB21B-PB, WGB12B), whole house descalers(e.g. WDS80K, WDS150K), and most standard housings for 10" x 4.5" filters.
Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please note: The o-rings are for 10"x4.5" filter housings only. If you need replacement o-rings for reverse osmosis (RO) pre-filter housings used in our RCC7 series, please consider iSpring ORF.
iSpring LS43 Water Leak Detector Alarm System with Automatic Shut-off Valve and 2 Detection Sensors, Connects Up to 8 Sensor to Prevent Flooding (LS43)
iSpring water leak detection system is designed and to be installed on whole house water pipe to detect and set alarm for possible leak and shut off water supply automatically to prevent flooding
Includes 2 water sensors. The controller unit is able to connect up to 8 water detection sensors
Includes a 3/4” NPT automatic shut-off ball valve
Requires a power outlet for the controller unit
1-year warranty with lifetime support from iSpring
iSpring UVB55FS 55W UV Replacement Lamp UV Bulb for UVF55FS Whole House UV Water Filter (UVB55FS)
Fits iSpring whole house UV water filter system UVF5FS
Durable, effective, and reliable
55-Watt UV lamp
Approximate dimension: 1 in. Dia x 35 in. L (not including the poles)
4-pin at one end
Flow rate: up to 12 GPM
Life: up to 9,000 hours
Out of Stock
$79.99
iSpring UVT55FS+UVS55FS UV Light Whole House Water Filter Transformer/Ballast with Water Flow Sensor, 55W 110V, for UVF55FS (UVT55FS+UVS55FS)
UV transformer/ballast with flow sensor for UVC lamps, 55-Watt, 110-Volt
Compatible only with iSpring whole house UV filter UVF55FS
UL recognized component
Current frequency: 60 Hz
1-year limited manufacturer warranty and lifetime tech support from iSpring water systems in Atlanta, GA.
Note: UVF55FS is capable of self-cleaning. Suppose the unit has been idled for 24 hours but still has power on. In that case, it will start the self-cleaning process by turning itself on for 300 seconds to ensure that water in the reactor chamber will not deteriorate.
iSpring ASLS43 Water Leak Detector Alarm System Add-on Detection Sensor (ASLS43)
Add-on sensor dedicated to LS43 water leak detector alarm system
15 feet long
1-year warranty with lifetime support from iSpring
iSpring AFR420K 420 ml/min Flow Restrictor, White (AFR420K)
Compatible with most reverse osmosis systems of 75 - 100 GPD (including brand names) in the market
To be installed on the drain line
Recommended for RO systems of 75GPD or 100GPD, or for customers whose source water TDS is more than 200 ppm
Features 1/4” quick connect fitting
iSpring MCRO1000 RO Membrane Replacement Filter for Tankless Commercial Reverse Osmosis Water Filtration System CRO1000, 1000 GPD (MCRO1000)
Dedicated RO membrane for iSpring tankless RO water filter system CRO1000, which is not only a great choice for residential drinking water treatment, but also suitable for drinking water filtration in offices, labs, and small businesses like restaurants, coffee shops, teashops, breweries, bars, salons, spas, clinics and more.
MCRO1000 removes up to 99% of over 1, 000 contaminants, including lead (up to 98%), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. This core of CRO1000 beats contaminants and provides you with clean water up to 1,000 gallons per day.
Inlet Water Pressure Range: 80 - 130 psi. Up to an exceptional 1.5:1 pure to drain water ratio, improving efficiency and saving water bill costs.
Quick and easy filter change. Depending on your water usage and the quality of your source water, please replace this RO membrane every 2-3 years to ensure optimal performance.
Peace-of-mind after-sale support is backed by a 30-day money-back guarantee, manufacturer warranty, and lifetime free tech and customer support in Atlanta, GA. Register online to activate your warranty. We stand behind our products. Please feel free to reach out to us for questions and assistance. Your satisfaction is our top priority!
iSpring MC600 RO Membrane Replacement Filter for Tankless Countertop Reverse Osmosis Water Filtration System RCT600, 600 GPD (MC600)
Dedicated RO membrane for iSpring countertop RO water filter system RCT600. Experience clean and fresh water every time you turn on your drinking water faucet.
This core of RCT600 is rated at 600 gallons per day. With up to 1.5:1 pure water to wastewater ratio, RCT600 is much more efficient than a traditional RO membrane.
MC600 removes up to 99% of over 1, 000 contaminants, including lead (up to 98%), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. Enjoy your water with confidence.
Quick and easy filter change. Depending on your water usage and the quality of your source water, please replace this RO membrane every 2-3 years to ensure optimal performance.
Peace-of-mind after-sale support is backed by a 30-day money-back guarantee, manufacturer warranty, and lifetime free tech and customer support in Atlanta, GA. Register online to activate your warranty. We stand behind our products. Please feel free to reach out to us for questions and assistance. Your satisfaction is our top priority!
iSpring HB23 20” Water Filter Housing 3/8” Outlet/Inlet, Blue (HB23)
Pressure release button
3/8 inch inlet/outlet
Package includes wrench to open and tighten the housings
Fit standard size filtration replacement cartridges: 2.5" x 20"
Cartridges are recommended to change every 6 months (not included)
iSpring ORWX2 Replacement O-ring for WSP WSPSL WSPGR Series Reusable Spin Down Sediment Water Filter - Pack of 2 (ORWX2)
Top-notch Quality: The o-rings are made of premium materials to make sure that the filters will be properly sealed without any leakage.
Dedicated O-rings for WSP/WSPSL/WSPGR series reusable spin down sediment water filter
Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please note: The o-rings are for WSP/WSPSL/WSPGR series only. If you need replacement o-rings for reverse osmosis (RO) pre-filter housings, please consider iSpring ORFX3.