- Free Shipping
- 1-Year Warranty
- 30-Day Return
- Lifetime Tech Support
iSpring WGB32B+WSP100ARJBP Whole House Water Filter System, Removes Sediment, Odor, Cloudiness, and up to 99% Chlorine, Up to 15 GPM Flow, w/ WSP100ARJ-BP Jumbo Auto Flush Spin Down Sediment Water Filter with Bypass
Couldn't load pickup availability
Features
The First Stage Water Filter
iSpring Multi-layer The first stage of iSpring WGB32B whole house water filter system is a sediment water filter.
iSpring FP25B Multi-layer filtration allows for fewer clogs and minimal pressure loss. This water filter is specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust that can clog the filters that follow.allows for less clogs and minimal pressure loss.
The Second & Third Stages Water Filters
The second and third stages of the iSpring WGB32B whole home water filter system are carbon water filters.
iSpring FC25B carbon block water filter uses high-quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life. It filters up to 100,000 gallons of water (or lasts up to 12 months). Two CTO water filters combined to deeply remove up to 99% of chlorine from water, as well as color, cloudiness, and various taste and odor compounds.
iSpring Whole Home Water Filtration Systems
iSpring WGB32B whole house water filtration system should be installed at the point of entry to treat the water of your whole house.
Cooking, bathing, and washing clothes with filtered water keeps you away from bad-tasting, smelly, and contaminated water that does harm to your health.
The filtered water also helps to extend the lifespan of your plumbing system and the household appliances, releasing your burden on plumbing repair and replacements.
Frequently Asked Question
Q: With this whole house water filter system, do I still need to install a water softener if my water is very hard?
A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 300 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
It is recommended that you install this WGB32B whole home water filtration system after your water softener to achieve optimal performance if you have hard water.
Product Features
- Peak Flow Rate: 15 GPM
- Minimum Working Pressure: 25 psi
- Maximum Working Pressure: 80 psi
- Operating Temperature: 40-100 °F
- pH Range: 6 - 11
- Easy DIY Install
- 1 inch NPT inlet/outlet
High Capacity with No Pressure Loss
- Depending on your water quality and water use, this whole home water filter system can provide you and your family up to a full year of clean water with no pressure loss.
- Save on your water bill - WGB32B whole house water filter won’t produce any wastewater.
- A high flow rate of up to 15 gallons per minute.
Easy Installation and Filter Change
- The whole house filter is built with 1-inch NPT inlet / outlet.
- Refer to our manual and helpful YouTube videos for easy installation.
- Drain the remaining water and twist off the housings. Filter replacement is a breeze.
- To prevent leakage, please check out our video on How to Apply Plumber’s Tape Correctly
- If you encounter any leakage during installation or filter changes, please let us know, and we will make it right for you.
Test before Purchase for Well Water Users
- If you are on well water, we recommend getting your water tested before purchasing this water filter for the best results. If you have any questions or need any product recommendations, please feel free to reach out. We are happy to help!
- iSpring Water Filters Whole House don’t remove TDS or Total Dissolved Solids. If you need a system that removes TDS, please instead check out our reverse osmosis systems.
Give You a Peace of Mind
- We offer tech and CS support via phone and email from Atlanta, GA.
- Contact our responsive and professional team for product selection that suits your water filtration needs.
- Now, and years to come, we will be right here and ready to help.
- Please refer to our video and manual for the installation guide. If you have any questions or difficulties during or after installation, feel free to reach out! We stand behind our products and are always here to help!
WGB32B
WGB32BM
WGB32B-PB
WGB22B
WDS150K
WF150K- Filter Size
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 4.5" x 20"
- 11" x 63.5"
- Filtration Capacity
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 100,000 Gallons
- Up to 150,000 Gallons
- Up to 1,000,000 Gallons
- Water Pressure Delivered
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 15 GPM
- Up to 26 GPM
- Reduces Chlorine, Taste, and Odor
- Up to 99%
- Up to 99%
- Up to 99%
- Up to 99%
- -
- Up to 99.9%
- Reduces Iron and Manganese
- -
- Iron: Max 3.0 ppm down to 0.01 ppm Manganese: Max 1.0 ppm down to 0.01 ppm
- -
- -
- -
- -
- Reduces Lead
- -
- -
- 150k gal at 100 ppb
- -
- -
- 99.4% reduction at 150 ppb
- Prevents and Reduces Scale and Corrosion
- -
- -
- -
- -
- ✓
- -
F3WGB32B
F6WGB32B
FP25B
FC25B
LS43- Filtration
- Sediment & Chlorine Reducing
- Sediment & Chlorine Reducing
- 5 Micron Sediment Reducing
- Chlorine Reducing
- -
- Media
- PP Carbon Block
- PP Carbon Block
- Polypropylene
- Coconut Shell Carbon
- Water Leak Detector Alarm System with Automatic Shut-Off Valve
- Recommended replacement cycle
- Every 6-12 months
- Every 6-12 months
- Up to 100,000 Gallons (12 Months)
- Up to 100,000 Gallons (12 Months)
- -
- Size
- 4.5” x 20”
- 4.5” x 20”
- 4.5” x 20”
- 4.5” x 20”
- 3/4” NPT thread 20 feet water sensor x2
- AvailabilityIn Stock
- Model WGB32B+WSP100ARJBP
- Manufacturer iSpring
- Product Dimensions 30.5"L x 8.0"W x 28.0"H
- Product Weight 90.0 LB
iSpring vs Other Brands
